Skip Navigation Website Accessibility
 


Press to Bond RNK

Use this "no sew" bonding material to adhere patches, appliqués and embroideries to most fabrics without stitching!

Press N Bond withstands laundering and dry cleaning and will create a permanent bond between fabric surfaces when heat is applied. NO sewing is required! Adheres to Vinyl, Polyester, Cotton, Polycotton and most other fabrics.

To Use Press N Bond®:

  1. Trace or print the reverse image onto the paper side of Press N Bond.
  2. Cut the shape to size.
  3. Fuse Press N Bond to the back of the fabric or embroidery. Use an iron temperature of at least 260® (125®) and hold pressure for at least 4 seconds.
  4. Once cooled, peel back the release paper which will expose the fusible surface.
  5. Position the patch/emblem or appliqué on the base material and press from the fabric side. Use the same temperature settings used in step 3 and hold the iron in place for 4 seconds in order to melt the adhesive.

*Note: All irons vary in temperature. The temperature given is a base estimate. If you find that you are not getting a good bond, increase your irons temperature until the adhesive melts.

**All adhesives will bond more securely to fabrics that do not have sizing or starch applied to the surface. If possible remove these finishes before using Press N Bond.

**Press N Bond is not recommended for items/fabrics containing Teflon.

Contact Us
  • Thornton Store
    3847 E 120th Ave
    Thornton, CO 80241
    303 317 2004
  • Littleton Store
    10201 W Bowles Ave
    Littleton, CO 80127
    720 440 9654
Follow Us