Skip Navigation Website Accessibility
 


QS Print & Piece Sheets

Use for printing foundation or paper-pieced patterns. This fiber-based foundation won't perforate while stitching and supports detailed patterns. The fibers are partially water-soluble; simply dampen the stitching lines and they remove easily without distorting stitches!

Directions for Use and Care

For paper or foundation piecing:

    • If possible, set your printer’s paper feed settings to “Decorative or Heavy Paper.” If your printer does not have this setting, load only one sheet of Print & Piece at a time.

    • Copy or print your favorite foundation or paper-piecing pattern directly onto Print & Piece stabilizer.

    • Cover the numbered sections as directed with your favorite fabrics until the block is complete.

    • Remove the stabilizer: once the stitching is complete, lightly dampen only the stitching lines with a wet sponge or cotton swab – the stabilizer tears away gently without distorting the stitches!

    • You can alternately leave the stabilizer within the block completely. When the quilt is laundered, the watersoluble fibers will dissolve and the non-soluble fibers will leave behind a very subtle loft. Create a test block with this method before applying it to an entire quilt to make sure you are happy with the results!



For stabilizing decorative or satin stitches:

    • Place one layer of Print & Piece directly under fabric and stitch.

    • To remove the stabilizer, lightly dampen only the stitching with a sponge or cotton swab – the stabilizer will pull away without distorting delicate heirloom, satin or decorative stitches!


Washer and Dryer Safe

Cool water and low drying temperature recommended.

Press using a medium setting on your iron.

Contact Us
  • Thornton Store
    3847 E 120th Ave
    Thornton, CO 80241
    303 317 2004
  • Littleton Store
    10201 W Bowles Ave
    Littleton, CO 80127
    720 440 9654
Follow Us